Title 16
SECTION 1220.2
1220.2 Requirements for non-full-size baby cribs.
§ 1220.2 Requirements for non-full-size baby cribs.(a) Except as provided in paragraph (b) of this section, each non-full-size baby crib shall comply with all applicable provisions of ASTM F406-19, Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards, approved March 15, 2019. The Director of the Federal Register approves the incorporation by reference listed in this section in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. You may obtain a copy of this ASTM standard from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959; www.astm.org. You may inspect a copy at the Division of the Secretariat, U.S. Consumer Product Safety Commission, Room 820, 4330 East West Highway, Bethesda, MD 20814, telephone 301-504-7923, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email [email protected], or go to: www.archives.gov/federal-register/cfr/ibr-locations.html.
(b) Comply with the ASTM F406-19 standard with the following exclusions:
(1) Do not comply with sections 5.6.2 through 5.6.2.4 of ASTM F406-19.
(2) Do not comply with section 5.16.2 of ASTM F406-19.
(3) Do not comply with sections 5.19 through 5.19.2.2 of ASTM F406-19.
(4) Do not comply with section 7, Performance Requirements for Mesh/Fabric Products, of ASTM F406-19.
(5) Do not comply with sections 8.11 through 8.11.2.4 of ASTM F406-19.
(6) Do not comply with sections 8.12 through 8.12.2.2 of ASTM F406-19.
(7) Do not comply with sections 8.14 through 8.14.2 of ASTM F406-19.
(8) Do not comply with sections 8.15 through 8.15.3.3 of ASTM F406-19.
(9) Do not comply with section 8.16 through 8.16.3 of ASTM F406-19.
(10) Do not comply with sections 8.28 through 8.28.3.2 of ASTM F406-19.
(11) Do not comply with sections 8.29 through 8.29.3 of ASTM F406-19.
(12) Do not comply with sections 8.30 through 8.30.5 of ASTM F406-19.
(13) Do not comply with sections 8.31 through 8.31.9 of ASTM F406-19.
(14) Do not comply with sections 9.3.2 through 9.3.2.4 of ASTM F406-19.
[84 FR 56689, Oct. 23, 2019]