Title 16

PART 1512

Part 1512 - Requirements For Bicycles

PART 1512 - REQUIREMENTS FOR BICYCLES Authority:Secs. 2(f)(1)(D), (q)(1)(A), (s), 3(e)(1), 74 Stat. 372, 374, 375, as amended, 80 Stat. 1304-05, 83 Stat. 187-89 (15 U.S.C. 1261, 1262); Pub. L. 107-319, 116 Stat. 2776. Source:43 FR 60034, Dec. 22, 1978, unless otherwise noted.

16:2.0.1.3.103.1SUBPART A
Subpart A - Regulations
16:2.0.1.3.103.1.2.1SECTION 1512.1
   1512.1 Scope.
16:2.0.1.3.103.1.2.2SECTION 1512.2
   1512.2 Definitions.
16:2.0.1.3.103.1.2.3SECTION 1512.3
   1512.3 Requirements in general.
16:2.0.1.3.103.1.2.4SECTION 1512.4
   1512.4 Mechanical requirements.
16:2.0.1.3.103.1.2.5SECTION 1512.5
   1512.5 Requirements for braking system.
16:2.0.1.3.103.1.2.6SECTION 1512.6
   1512.6 Requirements for steering system.
16:2.0.1.3.103.1.2.7SECTION 1512.7
   1512.7 Requirements for pedals.
16:2.0.1.3.103.1.2.8SECTION 1512.8
   1512.8 Requirements for drive chain.
16:2.0.1.3.103.1.2.9SECTION 1512.9
   1512.9 Requirements for protective guards.
16:2.0.1.3.103.1.2.10SECTION 1512.10
   1512.10 Requirements for tires.
16:2.0.1.3.103.1.2.11SECTION 1512.11
   1512.11 Requirements for wheels.
16:2.0.1.3.103.1.2.12SECTION 1512.12
   1512.12 Requirements for wheel hubs.
16:2.0.1.3.103.1.2.13SECTION 1512.13
   1512.13 Requirements for front fork.
16:2.0.1.3.103.1.2.14SECTION 1512.14
   1512.14 Requirements for fork and frame assembly.
16:2.0.1.3.103.1.2.15SECTION 1512.15
   1512.15 Requirements for seat.
16:2.0.1.3.103.1.2.16SECTION 1512.16
   1512.16 Requirements for reflectors.
16:2.0.1.3.103.1.2.17SECTION 1512.17
   1512.17 Other requirements.
16:2.0.1.3.103.1.2.18SECTION 1512.18
   1512.18 Tests and test procedures.
16:2.0.1.3.103.1.2.19SECTION 1512.19
   1512.19 Instructions and labeling.
16:2.0.1.3.103.1.2.20SECTION 1512.20
   1512.20 Separability.
16:2.0.1.3.103.2SUBPART B
Subpart B - Policies and Interpretations [Reserved]
16:2.0.1.3.103.3.2.1.41APPENDIX
   Figure 1 to Part 1512 - Bicycle Front Fork Cantilever Bending Test Rig
16:2.0.1.3.103.3.2.1.42APPENDIX
   Figures 2 and 3 to Part 1512 - Handlebar Stem Loading and Entrance 8 Observation Angles
16:2.0.1.3.103.3.2.1.43APPENDIX
   Figure 5 to Part 1512 - Typical Handbrake Actuator Showing Grip Dimension
16:2.0.1.3.103.3.2.1.44APPENDIX
   Figures 6 and 7 to Part 1512 - Toe Clearance and Chain Guard Requirements
16:2.0.1.3.103.3.2.1.45APPENDIX
   Figure 8 to Part 1512 - Reflectorized Bicycle Wheel Rim Abrasion Test Device
16:2.0.1.3.103.3.2.1.46APPENDIX
   Table 1 to Part 1512 - Minimum Candlepower per Incident Foot-Candle for Clear Reflector 1
16:2.0.1.3.103.3.2.1.47APPENDIX
   Table 2 to Part 1512 - Minimum Candlepower per Incident Foot-Candle for Clear Reflector 1
16:2.0.1.3.103.3.2.1.48APPENDIX
   Table 3 to Part 1512 - Minimum Acceptable Values for the Quantity A Defined in the Retroreflective Tire and Rim Test Procedure
16:2.0.1.3.103.3.2.1.49APPENDIX
   Table 4 to Part 1512 - Relative Energy Distribution of Sources