';


Title 10 Part 611 → Subpart B → §611.103

Title 10 → Chapter II → Subchapter H → Part 611 → Subpart B → §611.103

Electronic Code of Federal Regulations e-CFR

Title 10 Part 611 → Subpart B → §611.103

e-CFR data is current as of September 19, 2019

Title 10Chapter IISubchapter HPart 611Subpart B → §611.103


Title 10: Energy
PART 611—ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM
Subpart B—Direct Loan Program


§611.103   Application evaluation.

(a) Eligibility screening. Applications will be reviewed to determine whether the applicant is eligible, the information required under §611.101 is complete, and the proposed loan complies with applicable statutes and regulations. DOE can at any time reject an application, in whole or in part, that does not meet these requirements. Any additional information submitted to DOE will be treated as provided in 10 CFR 600.15 and must be marked as provided in 10 CFR 600.15(b).

(b) Evaluation criteria. Applications that are determined to be eligible pursuant to paragraph (a) of this section shall be subject to a substantive review by DOE based upon factors that include, but are not limited to, the following:

(1) The technical merit of the proposed advanced technology vehicles or qualifying components, with greater weight given for factors including, but not limited to:

(i) Improved vehicle fuel economy above that required for an advanced technology vehicle;

(ii) Potential contributions to improved fuel economy of the U.S. light-duty vehicle fleet;

(iii) Likely reductions in petroleum use by the U.S. light-duty fleet; and

(iv) Promotion of use of advanced fuel (e.g., E85, ultra-low sulfur diesel).

(2) Technical Program Factors such as economic development and diversity in technology, company, risk, and geographic location.

(3) The adequacy of the proposed provisions to protect the Government, including sufficiency of Security, the priority of the lien position in the Security, and the percentage of the project to be financed with the loan.

(4) In making loans to those manufacturers that have existing facilities, priority will be given to those facilities that are oldest or have been in existence for at least 20 years even if such facilities are idle at the time of application.

[73 FR 66731, Nov. 12, 2008, as amended at 76 FR 26583, May 9, 2011]