Title 7

SECTION 3201.28

3201.28 Stationary equipment hydraulic fluids.

§ 3201.28 Stationary equipment hydraulic fluids.

(a) Definition. Fluids formulated for use in stationary hydraulic equipment systems that have various mechanical parts, such as cylinders, pumps, valves, pistons, and gears, that are used for the transmission of power (and also for lubrication and/or wear, rust, and oxidation protection).

(b) Minimum biobased content. The preferred procurement product must have a biobased content of at least 44 percent, which shall be based on the amount of qualifying biobased carbon in the product as a percent of the weight (mass) of the total organic carbon in the finished product.

(c) Preference compliance date. No later than May 14, 2009, procuring agencies, in accordance with this part, will give a procurement preference for qualifying biobased stationary equipment hydraulic fluids. By that date, Federal agencies that have the responsibility for drafting or reviewing specifications for items to be procured shall ensure that the relevant specifications require the use of biobased stationary equipment hydraulic fluids.

(d) Determining overlap with an EPA-designated recovered content product. Qualifying biobased products that fall under this item may, in some cases, overlap with the EPA-designated recovered content product: Re-refined lubricating oils. USDA is requesting that manufacturers of these qualifying biobased products provide information for the BioPreferred Web site of qualifying biobased products about the intended uses of the product, information on whether or not the product contains any recovered material, in addition to biobased ingredients, and performance standards against which the product has been tested. This information will assist Federal agencies in determining whether or not a qualifying biobased product overlaps with EPA-designated re-refined lubricating oils and which product should be afforded the preference in purchasing.

Note to paragraph (d):

Stationary equipment hydraulic fluid products within this designated item can compete with hydraulic fluid products with recycled content. Under the Resource Conservation and Recovery Act of 1976, section 6002, the U.S. Environmental Protection Agency designated re-refined lubricating oils containing recovered materials as items for which Federal agencies must give preference in their purchasing programs. The designation can be found in the Comprehensive Procurement Guideline, 40 CFR 247.11. EPA provides recovered materials content recommendations for re-refined lubricating oils in the May 1, 1995, Recovered Materials Advisory Notice (RMAN I). The RMAN recommendations can be found by accessing EPA's Web site http://www.epa.gov/epaoswer/non-hw/procure/products.htm and then clicking on the appropriate product name.

[73 FR 27973, May 14, 2008]